Welcome, Guest. Please login or register.
September 07, 2010, 07:11:26 AM
Home Help Search Login Register
News: The EPG is no longer being downloaded to the inverto, all recording will have to be scheduled manually or from the now/next banner. Please check this thread http://www.invertoforum.co.uk/forum/index.php?topic=2055.0

+  Inverto Forum
|-+  Inverto IDL 7000 PVR - UK Terrestrial Version
| |-+  Bugs
| | |-+  Problem watching recording, when new recording starts.
« previous next »
Pages: [1] Go Down Print
Author Topic: Problem watching recording, when new recording starts.  (Read 8417 times)
Multiplexor
Newbie
*
Offline Offline

Posts: 22

View Profile
« on: January 17, 2006, 11:17:10 PM »
I have noticed this happen a few times now. If i am watching a previously recorded program from the library, and a new recording begins at the same time, it causes the screen to lock up. This can only be cured by rebooting the verty using the switch at the back, which means that i lose some of the new recording.
Does this sound familiar to anybody else?
Thanks
Multiplexor
Logged
The Eagle
Crystal Palace
Verty Addict
******
Offline Offline

Posts: 1757


View Profile
« Reply #1 on: January 18, 2006, 05:34:55 AM »
Quote from: Multiplexor on January 17, 2006, 11:17:10 PM
I have noticed this happen a few times now. If i am watching a previously recorded program from the library, and a new recording begins at the same time, it causes the screen to lock up. This can only be cured by rebooting the verty using the switch at the back, which means that i lose some of the new recording.
Does this sound familiar to anybody else?
Thanks
Multiplexor

Afraid not!
Logged
paulj1
Newbie
*
Offline Offline

Posts: 49

Verty is dead, switched to Freesat

MSN Messenger - pjfilter-im@yahoo.co.uk
View Profile
« Reply #2 on: January 18, 2006, 10:03:30 AM »
I've only seen this once soon after I received the Verty, so I might have been on V1.003. 

Paul
Logged
Inverto 7000 (RIP), Humax Foxsat HDR Freesat, Sony V828 A/V receiver, Panasonic 32LZD85 LCD TV, Sony 350 Blu-Ray DVD, Harmony 785 remote
Zuke
Jr. Member
**
Offline Offline

Posts: 73


View Profile
« Reply #3 on: January 18, 2006, 10:44:35 AM »
I've seen similar problems three times in the last couple of weeks, since loading the latest beta software.
Logged
Inverto IDL7000 with upgraded 160GB Maxtor QuickView HDD, firmware v1.008.
Inverto IDL7000 with original 60GB HDD, firmware v1.008.

St Ives, Cornwall - Redruth TX
spm
Newbie
*
Offline Offline

Posts: 13

View Profile
« Reply #4 on: January 18, 2006, 10:46:37 AM »
Yep. I've seen it as well. Running 1.006. Very annoying.
Logged
Multiplexor
Newbie
*
Offline Offline

Posts: 22

View Profile
« Reply #5 on: January 18, 2006, 04:29:17 PM »
Just for the record, my verty is on V1.006 as well.
Logged
Zuke
Jr. Member
**
Offline Offline

Posts: 73


View Profile
« Reply #6 on: January 22, 2006, 12:02:14 PM »
This happened again last night, except we were watching a programme ending at 21:00, which was being recorded from the record list, with about 10 minutes timeslip.  There were two new scheduled recordings due to start at 21:00, one on the same channel as we were watching.  At 21:00 the Inverto claimed there were no available tuners, then went out of control.  Heavy disc activity, nothing in the library would play and couldn't turn off from the remote.  Recovered ok after a power cycle, but the the two new recordings were screwed of course.  This is a very annoying problem and would prevent me from recommending this unit at the moment.  Running the current beta-test software.
Logged
Inverto IDL7000 with upgraded 160GB Maxtor QuickView HDD, firmware v1.008.
Inverto IDL7000 with original 60GB HDD, firmware v1.008.

St Ives, Cornwall - Redruth TX
The Special One
Sr. Member
****
Offline Offline

Posts: 486


LOOK OUT INVERTO- I am coming Back!!!!

View Profile
« Reply #7 on: January 22, 2006, 12:19:52 PM »
Quote from: Zuke on January 22, 2006, 12:02:14 PM
This happened again last night, except we were watching a programme ending at 21:00, which was being recorded from the record list, with about 10 minutes timeslip.  There were two new scheduled recordings due to start at 21:00, one on the same channel as we were watching.  At 21:00 the Inverto claimed there were no available tuners, then went out of control.  Heavy disc activity, nothing in the library would play and couldn't turn off from the remote.  Recovered ok after a power cycle, but the the two new recordings were screwed of course.  This is a very annoying problem and would prevent me from recommending this unit at the moment.  Running the current beta-test software.

I have passed this and the other posts regarding this issue on to the engineers.

This is an urgent "bug" that is being investigated
Logged
Zuke
Jr. Member
**
Offline Offline

Posts: 73


View Profile
« Reply #8 on: January 22, 2006, 03:06:21 PM »
Quote from: The Special One on January 22, 2006, 12:19:52 PM

I have passed this and the other posts regarding this issue on to the engineers.

This is an urgent "bug" that is being investigated

Thanks, the prompt response is much appreciated!
Logged
Inverto IDL7000 with upgraded 160GB Maxtor QuickView HDD, firmware v1.008.
Inverto IDL7000 with original 60GB HDD, firmware v1.008.

St Ives, Cornwall - Redruth TX
Pages: [1] Go Up Print 
« previous next »
 


Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 2.0 RC3 | SMF © 2006–2010, Simple Machines LLC Valid XHTML 1.0! Valid CSS!